Use this to remove the toughest stains and smears from sensors that are not removeable by other solutions such as alcohol. The tough spots include chamber clean coating film, electronic wax, mechanical oil and saliva drops. Smear Away Instructions:1. Add 2-3 drops to one cotton applicator (such as Sensor Clean™ applicators - available separately) 2. Wipe the surface, discard applicator 3. Take out another applicator wipe the surface and discard applicator 4. Repeat Step three, three times and discard the applicator 5. If the liquid dried and left a mark, wet a new applicator and wipe out the marked area. Continue the process until the surface is clean and dry 6. Once the sensor is completely dry, blast your Sensor Brush™ with compressed air (or bulb blower) and pass it along the sensor to get rid of any cotton fibers left.
Use this to remove the toughest stains and smears from sensors that are not removeable by other solutions such as alcohol. The tough spots include chamber clean coating film, electronic wax, mechanical oil and saliva drops. Smear Away Instructions:
1. Add 2-3 drops to one cotton applicator (such as Sensor Clean™ applicators - available separately) 2. Wipe the surface, discard applicator 3. Take out another applicator wipe the surface and discard applicator 4. Repeat Step three, three times and discard the applicator 5. If the liquid dried and left a mark, wet a new applicator and wipe out the marked area. Continue the process until the surface is clean and dry 6. Once the sensor is completely dry, blast your Sensor Brush™ with compressed air (or bulb blower) and pass it along the sensor to get rid of any cotton fibers left.
