Model No:70000
An entry-level DSLR sensor cleaning tool, the SL 700 is compact and can easily be fitted into a photographer's pocket. It uses one AAA battery and has a lower spinning speed compared to the Arctic Butterfly 724 model. It does not have interchangeable heads. It comes in one size and can be used in all DSLR sensors for removing dust and fibers.Arctic Butterfly Instructions:1. Requires 1 "AAA" battery. Use high quality batteries for best performance. Remove the batteries before traveling on an airplane. 2. Do not use on camera chamber or parts other than sensor, otherwise you will smear the sensor. 3. Wash inside the cap occasionally with mild soap or in case of a smear. 4. When removing the cap, do not pull straight off. Instead, unscrew the cap following the arrows direction then pull. 5. Turn the device on and spin the brush 3 times for 5 seconds each time prior to every use. This will enhance the charges and remove any particles within the fibers. 6. Do not spin the brush while on sensor. Keep your fingers away from the power button on the device while cleaning the sensor to prevent accidental spinning. 7. Take the Arctic Butterfly™ - SL 700 and gently brush across your sensor ONCE. Do not spin the brush while on sensor! Keep your fingers away from the power button on the device while cleaning the sensor to prevent accidental spinning. 8. Repeat steps 6 through 8 if necessary 9. Re-capping the SL 700—brush head: While rotating the SL700 body, Insert the Brush head into the Cap until the Brush fibers are completely inserted in one direction. 10. The Brush head needs to be washed after few cleaning or if smear occurs. Please check with VisibleDust on how to wash the brush safely. PLEASE NOTE COLOUR OF PRODUCT MAY VARY
An entry-level DSLR sensor cleaning tool, the SL 700 is compact and can easily be fitted into a photographer's pocket. It uses one AAA battery and has a lower spinning speed compared to the Arctic Butterfly 724 model. It does not have interchangeable heads. It comes in one size and can be used in all DSLR sensors for removing dust and fibers.
Arctic Butterfly Instructions:1. Requires 1 "AAA" battery. Use high quality batteries for best performance. Remove the batteries before traveling on an airplane. 2. Do not use on camera chamber or parts other than sensor, otherwise you will smear the sensor. 3. Wash inside the cap occasionally with mild soap or in case of a smear. 4. When removing the cap, do not pull straight off. Instead, unscrew the cap following the arrows direction then pull. 5. Turn the device on and spin the brush 3 times for 5 seconds each time prior to every use. This will enhance the charges and remove any particles within the fibers. 6. Do not spin the brush while on sensor. Keep your fingers away from the power button on the device while cleaning the sensor to prevent accidental spinning. 7. Take the Arctic Butterfly™ - SL 700 and gently brush across your sensor ONCE. Do not spin the brush while on sensor! Keep your fingers away from the power button on the device while cleaning the sensor to prevent accidental spinning. 8. Repeat steps 6 through 8 if necessary 9. Re-capping the SL 700—brush head: While rotating the SL700 body, Insert the Brush head into the Cap until the Brush fibers are completely inserted in one direction. 10. The Brush head needs to be washed after few cleaning or if smear occurs. Please check with VisibleDust on how to wash the brush safely.
PLEASE NOTE COLOUR OF PRODUCT MAY VARY
To add this item to your basket select colour/size where relevant and click the button:
Variation:
N/A
Options:
Quantity:
